| 1. |
Disconnect the negative (-) battery
terminal. |
| 2. |
Drain the cooling water of the
radiator. |
| 3. |
Remove the heater hose and the drain
hose.
|
| 4. |
Drain the
refrigerant. |
| 5. |
Disconnect the air conditioning suction hose
and the liquid tube.
|
| 6. |
Remove the driver's seat and the passenger's
seat.
|
| 7. |
Remove the cowl side trim and the front pillar
trim.
|
| 8. |
Remove the air bag module.
|
| 9. |
Remove the steering wheel.
|
| 10. |
Remove the steering lower and upper
shroud.
|
| 11. |
Remove the multi-function switch.
|
| 12. |
Remove the crash pad under cover for the
driver side.
|
| 13. |
Remove the cluster housing.
|
| 14. |
Remove the cluster.
|
| 15. |
After removing the center facia panel,
disconnect the connectors.
|
| 16. |
Remove the audio.
|
| 17. |
Remove the floor console upper
cover. |
| 18. |
Remove the floor
console. |
| 19. |
Remove the glove box.
|
| 20. |
Remove the glove box lamp connector and the
lamp.
|
| 21. |
Remove the main crash pad mounting
bolt.
|
| 22. |
Remove the main crash pad.
|
| 23. |
Remove the heater unit mounting
nut. |
| 24. |
Remove the heater
unit. |
Installation is the
reverse of the removal.
